Hamilube® 1989 is a specially formulated synthetic lubricant for use in metal forming operations on aluminum and other non-ferrous metals, such as cooper or brass. It is recommended for drawing, stamping, blanking and cutting as a replacement for petroleum based straight oils. It contains no oil, sulfur, or chlorine. It provides excellent high film strength boundary lubrication, leaves no residue upon burnoff in an anneal, and is easily removed. Hamilube®1989-B is a lower viscosity version of Hamilube® 1989. Hamiterge® 711-5 is a powdered alkaline cleaner designed for immersion cleaning of mill soils from steel surfaces and can be used on aluminum, copper and brass. It is also available in a low foam version (Hamiterge® 711-5-LF) for spray washers. Steelgard® 1505-M is a solvent based rust preventive with a high flash point for use on steel and cast iron. It provides 6-12 months indoor storage protection under normal humidity conditions. Steelgard® 1505-B is designed for long term, thin film corrosion protection for ferrous and non-ferrous surfaces. It displaces moisture and leaves a thin, clear, non-staining film that dries to the touch in three hours. It is readily removed by mineral spirits or mild alkali washes. Purgitol® S-8 is a concentrated liquid cleaner for rolling oil and other mill soil removal from steel strip by application through spray headers at the last stand on a four or five stand cold reducing tandem mill. Purgitol® S-8 may also be used as a water soluble straightener lubricant for wire or rods on roll straightener equipment. It has excellent corrosion protection, boundary lubrication and is low foaming (for recirculating sprays). Kleerkut® 1900-FR is a light duty synthetic for machining & grinding operations on steel, cast iron, and aluminum. Immunol ® Extra-J a detergent, wetting agent and rust preventive for cleaning and protecting most ferrous metals against rust. Not suitable for use on cast iron and cast steel. Replaces Immunol® Extra and contains no nitrosamines. Immunol® 517-JV is an in-plant rust preventive for ferrous surfaces including cast and malleable iron, in hydostatic and ultrasonic testing, in spray washers for mild cleaning and rust inhibition, in one or two stages. It can be added to tumbling media for cleaning and rust inhibition, as a dip after tumbling, and as a grinding coolant-mixed with water, as well as a water quench after heat treating. Immunol® 438-X is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., Magnaflux and Magnaglo. It is also an additive to hydrostatic test solutions. It provides rust inhibition, dispersion and wetting to steel, iron, copper, brass and zinc surfaces. Hamilube® 2078 is a lubricant for stamping, blanking and deep drawing of steel, copper or brass. It is light viscosity oil designed for light to medium grade applications. While it is for use as received, it can be cut back with mineral oil for lighter work. The light film which 2078 deposits provides rust protection to steel parts after processing. Removal of the residue from the metal is accomplished with solvent degreasing, detergent, or alkaline cleaning. Hamilube® 2078-B is an upgraded version of Hamilube® 2078 designed to provide more lubricity and a heavier film thickness Hamiterge® 8922 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, drawing and stamping lubricants, rust preventives, metallic chips and fines, and other oily soils, shop or mill dirt from steel strip, wire, rod and bars. It is designed for use in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperatures in dilutions with water. It is low foaming, completely biodegradable, and free rinsing. It will not buildup hard water deposits and contains no phosphates. Aqualube® 2023 FR is a water miscible, synthetic compound for light to medium drawing, stamping and blanking operations of all metals. This product provides excellent lubricity and leaves a light, protective film. Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides excellent lubricity and leaves a light, protective film to provide post process corrosion protection on steel. Aquaroll® 7606-FO is an emulsifiable cold rolling lubricant for steel, copper and brass. It is applicable for use in grade rolling of blanks in tableware manufacture. It is non-staining to rolls and work, contains little ash, is long lasting and low foaming. Hamico® 142 is designed for use as a vanishing lubricant. It contains lubricity additives which make it suitable for stamping, blanking and deep drawing of light gauge steel, stainless steel, brass, and aluminum. This product’s evaporation rate is faster than that of Hamico® 138-L. Hamico® 1003 is a light colored, transparent, odorless lubricating oil for machinery and equipment requiring an extremely clean condition with a light oil. It can be used in many applications where light lubrication is needed, e.g., forming, bending, stamping, straightening. It can be used on all metals as received, by pumping, dip, spray or wipe. Hamico® EDM is a light colored, transparent, odorless oil for use as the dielectric fluid in EDM (electric discharge machining) operations. It is an extraordinarily pure lubricant with many performance benefits which make it a clear choice as a superior EDM fluid. These benefits include: exceptionally high dielectric strength and clarity, extremely low toxicity, low volatility, outstanding oxidative and thermal stability, low aromatic content, and excellent separation from water. Hamidraw® 497-B is composed of extreme pressure resisting chlorinated base and synthetic esters. It contains no pigments, is non-flammable and is completely removable in mineral or chlorinated solvents. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils. Hamidraw® 497-MX-2 is composed of extreme pressure resisting chlorinated base and synthetic esters. Pigmented and non-flammable, this product is completely removable in mineral solvents, chlorinated solvents and hot alkaline cleaners. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils. Hamidraw® 1829 is an ultra-heavy duty, water soluble, extreme pressure lubricant, offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. It is designed for extremely difficult draws to provide maximum extreme pressure lubrication and is non-staining to metals and carbide dies. The residual film offers corrosion protection for the drawn parts. If diluted at 1:1 with water, Hamidraw® 1829 forms a low viscosity, stable emulsion. Hamidraw® 1829 can also be diluted with petroleum solvents or mineral oils. Hamidraw® 1829 is suited to spray application or direct flood application onto workpiece or dies. Hamidraw® 1846-NC is a heavy duty non-chlorinated pigmented drawing lubricant for ferrous or stainless steels. It can be used for severe draws such as tube reducing, bar drawing, wire drawing, etc. The lubricant cleans quickly with hot alkaline or hot detergent cleaning. Hamidraw® 1945 Series (100-700) is a lubricant for blanking and deep drawing of all metals. It is a heavy duty oil and can be cut back with mineral oil for lighter work. Removal from the metal can be done with solvents or alkaline cleaners. Hamidraw® 1945 is offered in various viscosity grades. Hamidraw® 9000-F is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping of steel and non-ferrous metals such as copper, brass or bronze. It is a soluble oil containing a polymeric lubricant package which provides the extreme pressure lubricating properties without the negative impact environmental issues associated with chlorinated additives. This formulation offers good corrosion prevention on steel and the non-ferrous metals; particularly copper and brass. It is formulated to provide enhanced anti-wear properties and mild boundary lubrication. Hamikleer® 712-2 is a water soluble synthetic couplant for ultrasonic testing replacing glycerine. The buffering action permits testing of many metals and metallic couples that heretofore corroded in aqueous-phase couplants. The low halogen content makes Hamikleer® 712-2 ideal for use on titanium and other space-age metals where possible halogen stress corrosion could be a problem. When used neat, the product’s viscosity permits testing of vertical surfaces while exceptional water solubility and solution clarity allow easier rigging and positioning in submerged tank testing. Hamikleer® High Viscosity U.T. Couplants is a series of high viscosity versions of Hamikleer® 712-2 for ultrasonic testing of metals:
Hamikleer® 712-HV-1 Viscosity - 38,000 - 45,000 cps @ 720F
Hamikleer® 712-HV-2 Viscosity - 27,000 - 33,000 cps@ 720F
Hamikleer® 712-HV-3 Viscosity - 5,000 - 8,000 cps @ 720F
Hamikleer® 1975 HD is a synthetic machining lubricant/coolant for ferrous and non-ferrous metals. It provides the needed lubrication for light or heavy machining operations including: boring, drilling, reaming, tapping, and threading. It is non-staining to non-ferrous metals, e.g., copper, brass, and aluminum and has a liquid residual film, which keeps machinery parts moving.
Hamikleer® 1995 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations where foam control is essential, such as double disc or plunge grinding, or high speed machining. It provides lubrication needed for moderate to heavy duty machining operations, such as turning, drilling, reaming, broaching, boring and tapping. It is non-staining to non-ferrous metals, (e.g., copper alloys and aluminum), contains extreme pressure friction reducing lubricant additives, and provides good lubrication and rust protection to steel. Hamikleer® 1995 has a liquid residual film, which keeps machinery parts moving, and has excellent wetting to keep swarf and fines from depositing on machinery, and enabling them to settle out quickly in central sumps. It rejects contaminants such as most tramp oils and is highly bacterial resistant, which extends sump life of central and individual systems. Hamikleer® 2095 is a synthetic grinding and machining coolant concentrate designed to be used on both ferrous metals, non-ferrous metals, and also on milling of scale from copper or brass strip. Solutions provide excellent rust protection for cast iron and ferrous alloys with no staining on zinc, copper, brass, and bronze. The solution keeps wheels clean and suspends metallic fines and swarf, preventing their precipitation on ways, tables, and other work surfaces. It will not turn rancid and does not cause dermatitis. Hamikleer® 8307-A and 8307-B are water soluble synthetic couplants for contact ultrasonic testing replacing glycerin. They are chemically pure couplants that contain little or no contamination, which makes them acceptable for the testing requirements of turbine blade manufacturers. They are more highly pure compounds than the Hamikleer® 712 series of couplants. Hamikut® 9036-B is an enhanced heavy duty soluble oil lubricant for heavy duty machining of ferrous and non-ferrous metals, including zinc. Provides corrosion protection, is low foaming, possesses excellent emulsion stability and produces good micro-finishes. It provides improved biological control capability for longer sump life in re-circulating systems. Hamilube® 1744 is a straight oil containing extreme pressure additives for general machining of all metals, including Magnesium. Hamilube® 1955-A is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorus. It is transparent to allow viewing of the work piece during machining. It is not suitable for use with non-ferrous metals. It contains active sulfur and is non-staining on steel. Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus or animal fats. Not suitable for use with non-ferrous metals. Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing. Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing. Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube containing an advanced additive package that is free of sulfur, chlorine, and pigmented compounds. It has excellent lubrication characteristics that compares very favorably to chlorinated and sulfurized lubes. While it is designed for use neat, as received, it can be cut back with mineral oil or solvents for lighter work. Removal of the residue from the metal can be performed with solvent degreasing, detergent, or alkaline cleaning. Hamilube® X-244-D is a coolant and lubricant for honing, lapping, grinding and light cutting operations on steel or aluminum. It is a thin-bodied straight oil which provides a media by which a finish can be imparted to a steel surface. It lubricates and keeps stones and metal work pieces clean. It has good heat absorption/transfer properties and doesn’t cause gumming. Hamisolve® 622 is a light colored, transparent degreasing solvent used in many applications for removal of oils, greases, mill soils, etc. Can be used on all metals, as received, by dip, spray or wipe. It will evaporate completely leaving surfaces clean and dry. Hamistrip® 1650 is for easy removal of most shop soils like soluble oil, grease and metal chips and fines. It is an alkaline rust and paint remover combining caustics and organic acids Hamiterge® 1934-RP is a concentrated liquid emulsion cleaner for removal of oily films, metallic chips and fines, shop or mill dirt, and lube oil residues from steel, cast iron and aluminum surfaces. It is designed for use in single stage cleaning operations; immersion tanks or roto-brush type washers at elevated or ambient temperatures. It may be used diluted with hot or cold water and is free rinsing. It provides rust protection to steel and it is non-staining to aluminum. Hamiterge® 2031-C2 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, metallic chips and fines, oily soils, and shop or mill dirt from sheet steel surfaces and other ferrous metal parts. It is designed for usage in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperature conditions in dilutions with water. It is low foaming, completely biodegradable and free rinsing. It splits out cleaned soils readily and maintains low foaming characteristics when soils accumulate that can form soaps. Immunol® 791-J is a mild detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals. It protects cast iron and ferrous metals submerged in its solution indefinitely. It forms invisible, quick drying protective coatings on metal, which insure maximum “indoor” protection. Immunol® 985-J is a low foaming detergent spray cleaner for metal surfaces. It contains rust preventives which protect ferrous metals after cleaning for short periods indoors. It is a completely nitrite free product. It removes mineral and fatty mill soils completely without saponification; therefore, it is not spent in use. Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage. Immunol® 1357-2-J is a clear, medium body, green liquid. It is odorless, non-flammable and pH 7.0 neutral. It is used in paper manufacturing as calendar roll cleaner and felt conditioner. It is used as additive to soluble oil (or synthetic) systems to emulsify “tramp” or hydraulic oil, loosen sludge, settle heavy particles, lift “fines” or lighter bodies to the surface. This product prevents stains or rust on ground or polished work and prevents “smut” formation in rolling when added to the soluble rolling oil. It is also a successful and economical machine, floor and wall cleaner mixed with plain water at 2 to 6 ounces per gallon and applied by brush, mop, or rag. Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications. Immunol® 1921 is a combination cleaner and rust preventive concentrate for use as a vibratory de-burring compound with water on castings of iron, steel or aluminum. Immunol® AC-11 is a cleaner/brightener for usage in vibratory finishing or tumbling operations. A mildly acidic compound, it brightens steel, copper or brass parts. It provides detergency and wetting to suspend and carry off oils and smut from the surface of the metal parts being cleaned. It will not rust steel media. It is inhibited against attack on aluminum, so it will not etch the surface. This product is compatible with plastic, steel or ceramic media. Immunol® S-6-H is a detergent type cleaner for soak tank cleaning and degreasing of ferrous and non-ferrous parts. It emulsifies oils such as drawing compounds and rust preventives, and removes mill soils and smut very effectively. It may also be used for general purpose cleaning as a “bucket” solvent to replace more flammable or toxic materials. If used on aluminum, extended immersion times (one hour or more) produce darkening. Use Immunol® S-6-I as an alternative for aluminum. Immunol® S-10 is for all general cleaning and degreasing of ferrous and non-ferrous parts, replacing flammable, toxic solvents and alkaline cleaners. Emulsifies oils, mill soils and provides mild indoor rust protection in one operation. For use as vibratory finishing additive, in steel mills, metalworking plants, paper and textile mills as a “general purpose” immersion cleaner. Widely used in tumbling, vibratory finishers, and as a “bucket” cleaner. Kleerkut® 4900 Performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. Kleerkut® 4900 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming , easy to clean using filtration or centrifuge, and long lasting.
Kleerkut® 4900 has two "sister" products: Kleerkut® 4900-LT and Kleerkut® 4900 HD. For more information on these products, please inquire at: info@HarryMillerCorp.com. Purgitol® RPV-1 is a liquid metal cleaner concentrate for use in immersion tanks, ultrasonic cleaning, or rotary barrel cleaning systems. Its use is for removal of oily soils, such as machining, grinding, or drawing oil residues, synthetic coolants, rust preventives, lubricating oils, and rolling oils. It can be used on steel, cast and malleable iron, and non-ferrous metal surfaces. Purgitol® S is the answer for machine shops seeking to replace toxic, odorous, irritating solvents in their immersion cleaning operations. Purgitol® S cleans machining and drawing oils and lubricants, yet it contains no flammable or toxic ingredients. Steelgard® 20-M-1 Base is a long term indoor rust preventive base for all ferrous surfaces including bearings type and tool steels. Offering excellent non-staining property on stainless or alloys, it can be used in neat form for maximum protection but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles. Steelgard® 40-M-1 Base is an indoor rust preventive base for all ferrous surfaces including bearing steels, and tool steels. It is a barium free product. It can be used neat for maximum protection, but is generally used cut with from one to nine parts diluting oil or solvents. It is available in ready-to-use dilutions with mineral spirits, kerosene, 100 viscosity group I oil, mineral seal oil and similar vehicles. Steelgard® 535-RP is a soluble oil, containing an improved rust protection package, for prevention of tarnish and/or corrosion on copper, brass and bronze, as well as on ferrous surfaces. It protects against corrosion to steel for up to 6 months of indoor storage under normal plant humidity conditions when applied at 1:10 in water. Steelgard® 1301-NL is a soluble oil rust preventive for steel and cast iron. It disperses in plain water in any ratio of dilution to form a uniform white stable emulsion. It prevents rust on ferrous metals and also prevents white rust on galvanized surfaces. Steelgard® 1302-J is for rust protection of all ferrous metals, including cast and malleable iron. It is ideal for spray washer application for mild cleaning and rust protection. Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F. Steelgard®1883-4 is a synthetic water soluble rust preventive concentrate for temporary indoor storage protection of steel and cast or malleable iron. Solutions provide excellent rust protection for months of indoor storage under normal conditions. It is non-staining to non-ferrous metals such as brass, bronze or copper. Steelgard® 1926-BW is a soluble oil rust preventive for steel and non-ferrous metals for indoor storage protection of up to 6 months. It maintains excellent stability, even if contaminated by pickle tank residue. Steelgard® 1938-K-1 is a solvent based rust preventive for steel, iron or non-ferrous metals protection under normal indoor storage conditions. It provides 6 to 12 months protection in a normal warehouse storage environment. Steelgard® 2005 is a new innovation for use as a temper mill fluid for coated products replacing straight oils, solvents or the practice of dry tempering. In addition to preventing white rust, it produces a better “healed-over” surface, reduces roll pick-up, permits higher mill speed and achieves elongations with lower roll force. Steelgard® 8200-H is a synthetic rust preventive concentrate for the indoor storage protection of steel and copper coated steel. It produces a clear solution in water dilutions, so it can be utilized as a test tank additive for pressure testing of tubing. Steelgard® 8703-AT is a solvent based corrosion preventive for steel and cast iron which provides long term indoor protection against rust for periods up to 24 months under normal conditions. It can also provide protection under cover outdoors for up to six months. It is a low odor rust preventive, which leaves a dry film less than a mil in thickness. Steelgard® 8920-K is an indoor rust preventive for steel stored in an acidic atmosphere such as a pickling department. It is designed primarily for protection against hydrochloric (muriatic) acid vapors. It deposits an oily film and is a very low odor product. It protects against staining and contact corrosion in tightly wrapped steel coils. Steelgard® 9050 is a synthetic water soluble, concentrated rust preventive for temporary indoor storage protection of steel and cast or malleable iron. Solutions provide excellent rust protection for months of indoor storage under normal conditions. It darkens aluminum and other non-ferrous metals. This product deposits a film that is dry to the touch. Steelgard® 9060 is a water borne corrosion inhibitor for outdoor (covered), limited outdoor uncovered (up to 30-40 days), and indoor protection to steel & ferrous alloys. It is a ready to use product straight from the container and dries to a dry, transparent film that will not re-emulsify when exposed to moisture in the air. Steelgard® 9060 will provide excellent protection to metals under indoor or covered outdoor conditions. This product is particularly helpful where the need to reduce VOC emission levels is critical. Steelgard® X-267-B is a long term, outdoor rust preventive that can be used on ferrous or non-ferrous metals, in uncovered or covered storage conditions. It protects tools, stampings, forgings, castings, machinery, tubing or any metal parts that need a waxy, plastic, non-tacky film. It protects overseas and domestic shipments. | 
