Hamico® 1003 is a light colored, transparent, odorless lubricating oil for machinery and equipment requiring an extremely clean condition with a light oil. It can be used in many applications where light lubrication is needed, e.g., forming, bending, stamping, straightening. It can be used on all metals as received, by pumping, dip, spray or wipe. Aqualube® 2023 FR is a water miscible, synthetic compound for light to medium drawing, stamping and blanking operations of all metals. This product provides excellent lubricity and leaves a light, protective film. Hamico® 578-C is a liquid rust remover concentrate designed to dissolve rust on contact with steel or iron surfaces. The time required for rust removal is dependent on the degree of rust present. It removes light rust in a few minutes. Heavy rust will require longer times and may need repeated rinsing and application. It conforms to the general requirements of Mil Spec. M-10578-C, Type IV. Hamisolve® 622 is a light colored, transparent degreasing solvent used in many applications for removal of oils, greases, mill soils, etc. Can be used on all metals, as received, by dip, spray or wipe. It will evaporate completely leaving surfaces clean and dry. Hamisonic® X-289 and X-290 are ultrasonic couplants for contact testing on horizontal or vertical surfaces. X-289 is a light viscosity material and X-290 is a heavier viscosity material. These materials can be brushed on the test surface and left on or removed with a water wash. It is a more economical set of couplants; dries to a film having minimal residue. Immunol® 1357-2-J is a clear, medium body, green liquid. It is odorless, non-flammable and pH 7.0 neutral. It is used in paper manufacturing as calendar roll cleaner and felt conditioner. It is used as additive to soluble oil (or synthetic) systems to emulsify “tramp” or hydraulic oil, loosen sludge, settle heavy particles, lift “fines” or lighter bodies to the surface. This product prevents stains or rust on ground or polished work and prevents “smut” formation in rolling when added to the soluble rolling oil. It is also a successful and economical machine, floor and wall cleaner mixed with plain water at 2 to 6 ounces per gallon and applied by brush, mop, or rag. Steelgard® 1505-TC is designed for indoor long term protection of all ferrous and non-ferrous surfaces and for outdoor covered protection of up to 6 months. It provides months of protection in humidity cabinet tests at 100% relative humidity at 100 degrees F. Steelgard® X-267-B is a long term, outdoor rust preventive that can be used on ferrous or non-ferrous metals, in uncovered or covered storage conditions. It protects tools, stampings, forgings, castings, machinery, tubing or any metal parts that need a waxy, plastic, non-tacky film. It protects overseas and domestic shipments. |
