Atmoscleer® 1785 is a foam blanket and fume suppressant for sulphuric acid pickle baths. Small amounts produce a heavy foam which cuts fumes and saves energy. This product may also be used for phosphoric acid baths. Aquatemp® 8304-WT is a new synthetic chemical mill cleaner/rust preventive combination providing maximum “dry finish” rust protection. It is used where no reduction is required or desired as in “skin passing,” or “wet tempering.” It can be applied in conventional ways via spray headers at the entry side of the mill or with an air wipe on the delivery side. Steelgard® 1301-NL is a soluble oil rust preventive for steel and cast iron. It disperses in plain water in any ratio of dilution to form a uniform white stable emulsion. It prevents rust on ferrous metals and also prevents white rust on galvanized surfaces. Steelgard® 825 prevents “white rust” on zinc and aluminum surfaces under all conditions of indoor storage and handling as well as preventing rust on carbon steels and cast iron. Kleerkut® 4900 Performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. Kleerkut® 4900 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming , easy to clean using filtration or centrifuge, and long lasting.
Kleerkut® 4900 has two "sister" products: Kleerkut® 4900-LT and Kleerkut® 4900 HD. For more information on these products, please inquire at: info@HarryMillerCorp.com. Kleerkut® 1900-FR is a light duty synthetic for machining & grinding operations on steel, cast iron, and aluminum. Immunol® 438-X is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., Magnaflux and Magnaglo. It is also an additive to hydrostatic test solutions. It provides rust inhibition, dispersion and wetting to steel, iron, copper, brass and zinc surfaces. Aqualube® 2023 FR is a water miscible, synthetic compound for light to medium drawing, stamping and blanking operations of all metals. This product provides excellent lubricity and leaves a light, protective film. Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides excellent lubricity and leaves a light, protective film to provide post process corrosion protection on steel. Hamico® 863-EP Base is normally used as received, but can be diluted with oil, solvents, or water, depending on the operation. It may be applied by dipping, spray, or brushing. It is a combination of extreme pressure lubricants. It is used either neat or with oil. It is used primarily for tapping operations on steel. It will not corrode steel or aluminum on contact, but will stain brass and copper. Hamico® Neutralizer 809-L is a combination of liquid alkalis and surface-active (wetting) agents designed specifically for neutralizing acidic residues from ferrous metals after pickling operations. Hamicote® D-20-NL (and variations) are used for die casting, press forging, drop forging, upset forging, extruding lubricant, mold lubricant, drawing, stamping, preventing rust and white rust. Delivered at 100% concentration, and composed of extreme pressure lubricants and metallic soap, this product can be used neat or can be diluted. It disperses in plain water (in any ratio of dilution) to form a uniform, white, stable emulsion with a faintly alkaline pH of 8.0 and is completely soluble in stoddard solvent, kerosene or mineral oils. Is a rust preventive for ferrous metals and prevents white rust on galvanized surfaces. The product is an outstanding lubricant for metal surfaces at normal or elevated temperatures. The metallic component remains on hot surfaces up to 3000 F and can be applied in emulsion form adding to plain water at room or elevated temperatures. This product line offers exceptional performance and contains no silicones, manganese, copper, graphite or suspended matter. Hamidraw® 1828-A is a heavy duty, water soluble, extreme pressure lubricant offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. The residual film offers corrosion protection for the drawn parts. Hamidraw® 1828-DS is a heavy duty, water soluble drawing compound for lubrication of steel and non-ferrous metals in drawing operations. Hamidraw® 1829 is an ultra-heavy duty, water soluble, extreme pressure lubricant, offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. It is designed for extremely difficult draws to provide maximum extreme pressure lubrication and is non-staining to metals and carbide dies. The residual film offers corrosion protection for the drawn parts. If diluted at 1:1 with water, Hamidraw® 1829 forms a low viscosity, stable emulsion. Hamidraw® 1829 can also be diluted with petroleum solvents or mineral oils. Hamidraw® 1829 is suited to spray application or direct flood application onto workpiece or dies. Hamikleer® High Viscosity U.T. Couplants is a series of high viscosity versions of Hamikleer® 712-2 for ultrasonic testing of metals:
Hamikleer® 712-HV-1 Viscosity - 38,000 - 45,000 cps @ 720F
Hamikleer® 712-HV-2 Viscosity - 27,000 - 33,000 cps@ 720F
Hamikleer® 712-HV-3 Viscosity - 5,000 - 8,000 cps @ 720F
Hamikleer® 1975 HD is a synthetic machining lubricant/coolant for ferrous and non-ferrous metals. It provides the needed lubrication for light or heavy machining operations including: boring, drilling, reaming, tapping, and threading. It is non-staining to non-ferrous metals, e.g., copper, brass, and aluminum and has a liquid residual film, which keeps machinery parts moving.
Hamikleer® 1990 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations where foam control is essential, such as double disc or plunge grinding, or high speed machining. It provides lubrication needed for light to moderate duty machining operations, such as grinding, turning, drilling, reaming, and tapping. Hamikleer® 1990 is non-staining to non-ferrous metals and has a liquid residual film, which keeps machinery parts moving and provides good lubrication and rust protection to steel. It offers excellent wetting to keep swarf and fines from depositing on machinery, while enabling them to settle out quickly in central sumps. It rapidly rejects contaminants such as most tramp oils. It is highly bacterial resistant, which extends sump life of central and individual systems. Hamikleer® 1995 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations where foam control is essential, such as double disc or plunge grinding, or high speed machining. It provides lubrication needed for moderate to heavy duty machining operations, such as turning, drilling, reaming, broaching, boring and tapping. It is non-staining to non-ferrous metals, (e.g., copper alloys and aluminum), contains extreme pressure friction reducing lubricant additives, and provides good lubrication and rust protection to steel. Hamikleer® 1995 has a liquid residual film, which keeps machinery parts moving, and has excellent wetting to keep swarf and fines from depositing on machinery, and enabling them to settle out quickly in central sumps. It rejects contaminants such as most tramp oils and is highly bacterial resistant, which extends sump life of central and individual systems. Hamikleer® 8307-A and 8307-B are water soluble synthetic couplants for contact ultrasonic testing replacing glycerin. They are chemically pure couplants that contain little or no contamination, which makes them acceptable for the testing requirements of turbine blade manufacturers. They are more highly pure compounds than the Hamikleer® 712 series of couplants. Hamisonic® X-289 and X-290 are ultrasonic couplants for contact testing on horizontal or vertical surfaces. X-289 is a light viscosity material and X-290 is a heavier viscosity material. These materials can be brushed on the test surface and left on or removed with a water wash. It is a more economical set of couplants; dries to a film having minimal residue. Hamiterge® 1934-RP is a concentrated liquid emulsion cleaner for removal of oily films, metallic chips and fines, shop or mill dirt, and lube oil residues from steel, cast iron and aluminum surfaces. It is designed for use in single stage cleaning operations; immersion tanks or roto-brush type washers at elevated or ambient temperatures. It may be used diluted with hot or cold water and is free rinsing. It provides rust protection to steel and it is non-staining to aluminum. Hamiterge® 2031-C2 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, metallic chips and fines, oily soils, and shop or mill dirt from sheet steel surfaces and other ferrous metal parts. It is designed for usage in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperature conditions in dilutions with water. It is low foaming, completely biodegradable and free rinsing. It splits out cleaned soils readily and maintains low foaming characteristics when soils accumulate that can form soaps. Hamiterge® 2038-LFM is a highly caustic liquid alkaline cleaner for immersion cleaning operations requiring a strongly alkaline solution. It is for removal of extremely difficult soils from ferrous metal surfaces at elevated temperatures. It has excellent wetting and detergency. It can be used at high concentration and elevated temperature for removal of phosphate coatings and drawing lube residues from steel parts, such as tube, rod, bar, or wire. It is completely soluble in water and is free rinsing. Hamiterge® 8922 is a concentrated liquid alkaline spray cleaner for removal of rolling oil residues, drawing and stamping lubricants, rust preventives, metallic chips and fines, and other oily soils, shop or mill dirt from steel strip, wire, rod and bars. It is designed for use in power spray washers or roto-brush type cleaning equipment at elevated or ambient temperatures in dilutions with water. It is low foaming, completely biodegradable, and free rinsing. It will not buildup hard water deposits and contains no phosphates. Immunol® 517-JV is an in-plant rust preventive for ferrous surfaces including cast and malleable iron, in hydostatic and ultrasonic testing, in spray washers for mild cleaning and rust inhibition, in one or two stages. It can be added to tumbling media for cleaning and rust inhibition, as a dip after tumbling, and as a grinding coolant-mixed with water, as well as a water quench after heat treating. Immunol® 791-J is a mild detergent and rust inhibiting chemical for use on cast iron, cast steel and other ferrous metals. It protects cast iron and ferrous metals submerged in its solution indefinitely. It forms invisible, quick drying protective coatings on metal, which insure maximum “indoor” protection. Immunol® 985-J is a low foaming detergent spray cleaner for metal surfaces. It contains rust preventives which protect ferrous metals after cleaning for short periods indoors. It is a completely nitrite free product. It removes mineral and fatty mill soils completely without saponification; therefore, it is not spent in use. Immunol® 1357-2-J is a clear, medium body, green liquid. It is odorless, non-flammable and pH 7.0 neutral. It is used in paper manufacturing as calendar roll cleaner and felt conditioner. It is used as additive to soluble oil (or synthetic) systems to emulsify “tramp” or hydraulic oil, loosen sludge, settle heavy particles, lift “fines” or lighter bodies to the surface. This product prevents stains or rust on ground or polished work and prevents “smut” formation in rolling when added to the soluble rolling oil. It is also a successful and economical machine, floor and wall cleaner mixed with plain water at 2 to 6 ounces per gallon and applied by brush, mop, or rag. Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications. Immunol® AC-11 is a cleaner/brightener for usage in vibratory finishing or tumbling operations. A mildly acidic compound, it brightens steel, copper or brass parts. It provides detergency and wetting to suspend and carry off oils and smut from the surface of the metal parts being cleaned. It will not rust steel media. It is inhibited against attack on aluminum, so it will not etch the surface. This product is compatible with plastic, steel or ceramic media. Immunol® AC-20 an acid cleaner for use on equipment or floors stained with oxide or rust. It renews the appearance of equipment to a bright, shiny finish and protects against flash rust. Just mix with water, apply, let it perform and rinse off. Immunol® S-6-H is a detergent type cleaner for soak tank cleaning and degreasing of ferrous and non-ferrous parts. It emulsifies oils such as drawing compounds and rust preventives, and removes mill soils and smut very effectively. It may also be used for general purpose cleaning as a “bucket” solvent to replace more flammable or toxic materials. If used on aluminum, extended immersion times (one hour or more) produce darkening. Use Immunol® S-6-I as an alternative for aluminum. Immunol® S-10 is for all general cleaning and degreasing of ferrous and non-ferrous parts, replacing flammable, toxic solvents and alkaline cleaners. Emulsifies oils, mill soils and provides mild indoor rust protection in one operation. For use as vibratory finishing additive, in steel mills, metalworking plants, paper and textile mills as a “general purpose” immersion cleaner. Widely used in tumbling, vibratory finishers, and as a “bucket” cleaner. Purgitol® RPV-1 is a liquid metal cleaner concentrate for use in immersion tanks, ultrasonic cleaning, or rotary barrel cleaning systems. Its use is for removal of oily soils, such as machining, grinding, or drawing oil residues, synthetic coolants, rust preventives, lubricating oils, and rolling oils. It can be used on steel, cast and malleable iron, and non-ferrous metal surfaces. Purgitol® S is the answer for machine shops seeking to replace toxic, odorous, irritating solvents in their immersion cleaning operations. Purgitol® S cleans machining and drawing oils and lubricants, yet it contains no flammable or toxic ingredients. Purgitol® S-8 is a concentrated liquid cleaner for rolling oil and other mill soil removal from steel strip by application through spray headers at the last stand on a four or five stand cold reducing tandem mill. Purgitol® S-8 may also be used as a water soluble straightener lubricant for wire or rods on roll straightener equipment. It has excellent corrosion protection, boundary lubrication and is low foaming (for recirculating sprays). Sunspeed® PA-7 is an acid pickling accelerator containing organic compounds designed to accelerate scale removal from hot rolled steels. It was specifically developed for use in hydrochloric acid pickling systems. It accelerates the reaction between the hydrochloric acid and scale components; FeO, Fe2O3 and Fe3O4 to increasing the rate of scale removal. Steelgard® 535-RP is a soluble oil, containing an improved rust protection package, for prevention of tarnish and/or corrosion on copper, brass and bronze, as well as on ferrous surfaces. It protects against corrosion to steel for up to 6 months of indoor storage under normal plant humidity conditions when applied at 1:10 in water. Steelgard® 1302-J is for rust protection of all ferrous metals, including cast and malleable iron. It is ideal for spray washer application for mild cleaning and rust protection. Steelgard®1883-4 is a synthetic water soluble rust preventive concentrate for temporary indoor storage protection of steel and cast or malleable iron. Solutions provide excellent rust protection for months of indoor storage under normal conditions. It is non-staining to non-ferrous metals such as brass, bronze or copper. Steelgard® 8200-H is a synthetic rust preventive concentrate for the indoor storage protection of steel and copper coated steel. It produces a clear solution in water dilutions, so it can be utilized as a test tank additive for pressure testing of tubing. Steelgard® 9050 is a synthetic water soluble, concentrated rust preventive for temporary indoor storage protection of steel and cast or malleable iron. Solutions provide excellent rust protection for months of indoor storage under normal conditions. It darkens aluminum and other non-ferrous metals. This product deposits a film that is dry to the touch. | 
