Hamicote® EF-317 is an additive for lime or borax solutions to improve cohesive and adhesive properties and to disperse and suspend lime or borax more uniformly throughout the bath and on the rod while retarding rust and minimizing foam. Hamicote® EF-317 prevents powdering and dusting of dried lime and borax films and improves die life. Atmoscleer® 1785 is a foam blanket and fume suppressant for sulphuric acid pickle baths. Small amounts produce a heavy foam which cuts fumes and saves energy. This product may also be used for phosphoric acid baths. Sunspeed® PA-7 is an acid pickling accelerator containing organic compounds designed to accelerate scale removal from hot rolled steels. It was specifically developed for use in hydrochloric acid pickling systems. It accelerates the reaction between the hydrochloric acid and scale components; FeO, Fe2O3 and Fe3O4 to increasing the rate of scale removal. Immunol® 1809-J is an additive for ultrasonic and hydrostatic testing operations. It is an ideal corrosion inhibitor for ferrous and non-ferrous metals and couples. It is also employed as a grinding coolant for light duty applications. Immunol® 1228 is an additive for use in non destructive test applications such as ultrasonic inspection or hydrostatic (or pressure) testing. It provides rust protection and reduced surface tension to water baths used for immersion testing of these types. Is recommended for systems constructed of (or used for testing) steel and aluminum. It is low foaming and long lasting and provides protection against flash rusting and short term indoor storage. Immunol® 517-JV is an in-plant rust preventive for ferrous surfaces including cast and malleable iron, in hydostatic and ultrasonic testing, in spray washers for mild cleaning and rust inhibition, in one or two stages. It can be added to tumbling media for cleaning and rust inhibition, as a dip after tumbling, and as a grinding coolant-mixed with water, as well as a water quench after heat treating. Immunol® 438-X is an additive for water when water is used in place of solvents to suspend pastes and powders as in magnetic particle inspection, i.e., Magnaflux and Magnaglo. It is also an additive to hydrostatic test solutions. It provides rust inhibition, dispersion and wetting to steel, iron, copper, brass and zinc surfaces. Atmoscleer® 8001 is a foam blanket additive for hydrochloric acid batch pickling baths. It imparts a densely packed, uniform layer of foam on the surface of a steel pickling bath. Some agitation may be required to generate the foam layer when there is not enough pickling action occurring, such as when the bath temperature is very low (below 1000F). It is extremely stable in hydrochloric acid baths containing high amounts of dissolved iron and under high temperature conditions. It cuts down on heat loss and holds corrosive hydrochloric fumes in the bath. It should be used in conjunction with Activol® acid inhibitors for hydrochloric acids, such as Activol® 1803, Activol® 1590-C, Activol® 1590–CP or Activol® 1903 for best results in batch pickling operations. Activol® 1357 is an additive for sulfuric, hydrochloric, nitric and hydrofluoric acid pickling and cleaning solutions and may be used as specialty additive on titanium in nitric acid baths. Activol® 1357 reduces surface tension, accelerates acid action and provides detergency in solution. This product also serves as a mild inhibitor to minimize acidic attack on base metal during scale removal. It promotes complete rinsing and reduces fume formation. Activol® 1590-CP is an additive for hydrochloric acid pickling solutions which imparts both “wetting” and detergency, while inhibiting base metal attack and offering fume control. Particularly useful in low temperature batch or continuous operations, Activol® 1590-CP prevents over-pickling and provides acid savings, reduces metal weight loss, fumes and hydrogen embitterment. This product produces a bright uniform finish, prolongs pickle tank life, increases the speed of the pickling process and makes clear solutions in all acid concentrations which will not break down in acid storage tanks. Activol® 1658 is a wetting and detergency additive for pickling and acid brightening baths. It is extremely stable to both high electrolyte and oxidation and can be used in the nitric and nitric/hydrofluoric acid combinations used for pickling stainless steels, zirconium, titanium, and other highly alloyed or exotic metals. It is classified as a medium “foamer” and will produce a foam blanket to hold down toxic oxide fumes and steam vapor. Activol® 1793-B is a sulfuric acid inhibitor for batch pickling. It is one of our strongest inhibitors, is a good “wetter” and provides a more uniform pickle and a better rinse. Additionally, it eliminates acid fumes and reduces hydrogen embrittlement. Pickle Life 1673-D (acid extender) and Activol® 1793-B can be used in combination to extend the life of the acid bath to iron levels of 7-12%. Activol® 1793-NF is a non-foaming version which can be used in operations utilizing combustion heating. Activol® 1803 is the most efficient member of a line of hydrochloric acid pickling bath additives formulated for continuous hydrochloric picklers, including deep bath conventional and shallow dynamic systems. It provides all the requirements of a good pickling inhibitor including: descaling ability, high % efficiency (protection), excellent rinsability, reduced acid consumption, reduced gage and metal loss, durability, reduced hydrogen embrittlement, fume reduction and results in uniformly bright pickled surfaces. Activol® 2105 is the latest development in hydrochloric acid inhibitor technology, surpassing the level of protection to the base steel afforded by its predecessor, Activol® 1803. Activol® 2105 contains all the performance characteristics of a good pickling inhibitor, such as fume suppression, free-rinsing, reduced chloride carry-over, as well as reduced acid consumption due to superior base metal protection. Citriterge® 8910 is a cleaner consisting of natural citrus based solvents, surfactants and detergent components. It is designed to remove dirt, grease, oil and carbon smuts from metals and other hard surfaces. It also removes tar, pitch, asphalt, and gum soils from felts in papermaking operations. Citriterge® 8910 performs heavy duty cleaning without the use of petrochemical solvents, chlorinated solvents and harsh acids or alkalis. Hamico® 8906-WT Rinse Aid is a stain preventing additive for rinse systems following hydrochloric or sulfuric acid pickling operations. It is an acidic product possessing corrosion protection and wetting. It is designed to eliminate the brown or reddish stains often experienced on steel exiting a continuous pickler. It eliminates the formation of iron hydroxide slimes which accumulate in rinse tanks as a result of acid bath carryover. Hamico® Neutralizer 809-L is a combination of liquid alkalis and surface-active (wetting) agents designed specifically for neutralizing acidic residues from ferrous metals after pickling operations. Immunol® 1357-2-J is a clear, medium body, green liquid. It is odorless, non-flammable and pH 7.0 neutral. It is used in paper manufacturing as calendar roll cleaner and felt conditioner. It is used as additive to soluble oil (or synthetic) systems to emulsify “tramp” or hydraulic oil, loosen sludge, settle heavy particles, lift “fines” or lighter bodies to the surface. This product prevents stains or rust on ground or polished work and prevents “smut” formation in rolling when added to the soluble rolling oil. It is also a successful and economical machine, floor and wall cleaner mixed with plain water at 2 to 6 ounces per gallon and applied by brush, mop, or rag. Steelgard®1883-4 is a synthetic water soluble rust preventive concentrate for temporary indoor storage protection of steel and cast or malleable iron. Solutions provide excellent rust protection for months of indoor storage under normal conditions. It is non-staining to non-ferrous metals such as brass, bronze or copper. | 
