Hamico® 863-EP Base is normally used as received, but can be diluted with oil, solvents, or water, depending on the operation. It may be applied by dipping, spray, or brushing. It is a combination of extreme pressure lubricants. It is used either neat or with oil. It is used primarily for tapping operations on steel. It will not corrode steel or aluminum on contact, but will stain brass and copper. Hamicote® D-20-NL (and variations) are used for die casting, press forging, drop forging, upset forging, extruding lubricant, mold lubricant, drawing, stamping, preventing rust and white rust. Delivered at 100% concentration, and composed of extreme pressure lubricants and metallic soap, this product can be used neat or can be diluted. It disperses in plain water (in any ratio of dilution) to form a uniform, white, stable emulsion with a faintly alkaline pH of 8.0 and is completely soluble in stoddard solvent, kerosene or mineral oils. Is a rust preventive for ferrous metals and prevents white rust on galvanized surfaces. The product is an outstanding lubricant for metal surfaces at normal or elevated temperatures. The metallic component remains on hot surfaces up to 3000 F and can be applied in emulsion form adding to plain water at room or elevated temperatures. This product line offers exceptional performance and contains no silicones, manganese, copper, graphite or suspended matter. Hamidraw® 1829 is an ultra-heavy duty, water soluble, extreme pressure lubricant, offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. It is designed for extremely difficult draws to provide maximum extreme pressure lubrication and is non-staining to metals and carbide dies. The residual film offers corrosion protection for the drawn parts. If diluted at 1:1 with water, Hamidraw® 1829 forms a low viscosity, stable emulsion. Hamidraw® 1829 can also be diluted with petroleum solvents or mineral oils. Hamidraw® 1829 is suited to spray application or direct flood application onto workpiece or dies. Hamidraw® 1846-B is a heavy duty pigmented drawing lubricant for ferrous or stainless steels. It is utilized for extremely severe draws such as tube reducing, bar drawing, wire drawing when reductions up to 40% are required. The lubricant cleans quickly with hot alkaline or hot detergent cleaning. Hamikleer® 1990 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations where foam control is essential, such as double disc or plunge grinding, or high speed machining. It provides lubrication needed for light to moderate duty machining operations, such as grinding, turning, drilling, reaming, and tapping. Hamikleer® 1990 is non-staining to non-ferrous metals and has a liquid residual film, which keeps machinery parts moving and provides good lubrication and rust protection to steel. It offers excellent wetting to keep swarf and fines from depositing on machinery, while enabling them to settle out quickly in central sumps. It rapidly rejects contaminants such as most tramp oils. It is highly bacterial resistant, which extends sump life of central and individual systems. Hamikleer® 1995 is a bio-resistant synthetic machining and grinding lubricant/coolant for ferrous and non-ferrous metals. It is extremely low foaming, which makes it useful in operations where foam control is essential, such as double disc or plunge grinding, or high speed machining. It provides lubrication needed for moderate to heavy duty machining operations, such as turning, drilling, reaming, broaching, boring and tapping. It is non-staining to non-ferrous metals, (e.g., copper alloys and aluminum), contains extreme pressure friction reducing lubricant additives, and provides good lubrication and rust protection to steel. Hamikleer® 1995 has a liquid residual film, which keeps machinery parts moving, and has excellent wetting to keep swarf and fines from depositing on machinery, and enabling them to settle out quickly in central sumps. It rejects contaminants such as most tramp oils and is highly bacterial resistant, which extends sump life of central and individual systems. Hamikut® 100 is a new technology soluble oil metalworking lubricant that offers excellent bioresistance and stability to coolant systems. It can perform a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. It offers cooling, excellent friction reduction, extremely low foam and will not sour with microbial contamination. It is free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants. It is ideal for use in central systems. It is extremely easy to handle using filtration or centrifuge, and will not clog paper or filters. Hamilube® 1328-N contains no chlorinated compounds and only minimal amounts of sulfur and phosphorus. It has a light viscosity to flush away metal chips and provide efficient heat removal from the work and tooling. It is suitable for machining operations such as trepanning, threading, tapping, turning, milling and drilling of steel. Hamilube® 1904 is a hot forging lubricant for all types of steel. It may be used for press forging, drop forging and upset forging. It is a soluble oil with added lubrication value for metal surfaces at normal or elevated temperatures. It disperses in plain water to form a uniform, white, stable emulsion. It can be applied in its emulsion form on hot metal surfaces. Hamilube® 1989 is a specially formulated synthetic lubricant for use in metal forming operations on aluminum and other non-ferrous metals, such as cooper or brass. It is recommended for drawing, stamping, blanking and cutting as a replacement for petroleum based straight oils. It contains no oil, sulfur, or chlorine. It provides excellent high film strength boundary lubrication, leaves no residue upon burnoff in an anneal, and is easily removed. Hamilube®1989-B is a lower viscosity version of Hamilube® 1989. Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus or animal fats. Not suitable for use with non-ferrous metals. Hamilube® 7609 is a low viscosity straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. A combination of extreme pressure additives, along with its light viscosity, makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing. Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing. Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube containing an advanced additive package that is free of sulfur, chlorine, and pigmented compounds. It has excellent lubrication characteristics that compares very favorably to chlorinated and sulfurized lubes. While it is designed for use neat, as received, it can be cut back with mineral oil or solvents for lighter work. Removal of the residue from the metal can be performed with solvent degreasing, detergent, or alkaline cleaning. Aqualube® 2023 FR is a water miscible, synthetic compound for light to medium drawing, stamping and blanking operations of all metals. This product provides excellent lubricity and leaves a light, protective film. Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides excellent lubricity and leaves a light, protective film to provide post process corrosion protection on steel. Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to medium gauge steel and aluminum. Hamico® 138-L has extremely low odor, is non-emulsifying, has a rapid evaporation rate, and leaves minimal residue. Application of the lubricant can be via spraying, flooding or swabbing. Hamico® 142 is designed for use as a vanishing lubricant. It contains lubricity additives which make it suitable for stamping, blanking and deep drawing of light gauge steel, stainless steel, brass, and aluminum. This product’s evaporation rate is faster than that of Hamico® 138-L. Hamico® 1003 is a light colored, transparent, odorless lubricating oil for machinery and equipment requiring an extremely clean condition with a light oil. It can be used in many applications where light lubrication is needed, e.g., forming, bending, stamping, straightening. It can be used on all metals as received, by pumping, dip, spray or wipe. Hamico® EDM is a light colored, transparent, odorless oil for use as the dielectric fluid in EDM (electric discharge machining) operations. It is an extraordinarily pure lubricant with many performance benefits which make it a clear choice as a superior EDM fluid. These benefits include: exceptionally high dielectric strength and clarity, extremely low toxicity, low volatility, outstanding oxidative and thermal stability, low aromatic content, and excellent separation from water. Hamidraw® 497-B is composed of extreme pressure resisting chlorinated base and synthetic esters. It contains no pigments, is non-flammable and is completely removable in mineral or chlorinated solvents. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils. Hamidraw® 497-MX-2 is composed of extreme pressure resisting chlorinated base and synthetic esters. Pigmented and non-flammable, this product is completely removable in mineral solvents, chlorinated solvents and hot alkaline cleaners. It will not channel and is cohesive and adhesive. The viscosity of this product can be reduced by cutting back with solvents or mineral oils. Hamidraw® 1828-A is a heavy duty, water soluble, extreme pressure lubricant offering maximum lubricity for drawing, ferrous and non-ferrous metals, including stainless steel. The residual film offers corrosion protection for the drawn parts. Hamidraw® 1828-DS is a heavy duty, water soluble drawing compound for lubrication of steel and non-ferrous metals in drawing operations. Hamidraw® 1828-LC is a heavy duty, water soluble drawing compound for lubrication of steel and non-ferrous metals in drawing operations. It has a reduced amount of extreme pressure lube additives from the Hamidraw® 1828-DS version. Hamidraw® 1846-NC is a heavy duty non-chlorinated pigmented drawing lubricant for ferrous or stainless steels. It can be used for severe draws such as tube reducing, bar drawing, wire drawing, etc. The lubricant cleans quickly with hot alkaline or hot detergent cleaning. Hamidraw® 1945 Series (100-700) is a lubricant for blanking and deep drawing of all metals. It is a heavy duty oil and can be cut back with mineral oil for lighter work. Removal from the metal can be done with solvents or alkaline cleaners. Hamidraw® 1945 is offered in various viscosity grades. Hamidraw® 9000-F is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping of steel and non-ferrous metals such as copper, brass or bronze. It is a soluble oil containing a polymeric lubricant package which provides the extreme pressure lubricating properties without the negative impact environmental issues associated with chlorinated additives. This formulation offers good corrosion prevention on steel and the non-ferrous metals; particularly copper and brass. It is formulated to provide enhanced anti-wear properties and mild boundary lubrication. Hamidraw® 9014-LV and 9019 are tube hydroforming lubricants for applications to the outer diameter of parts being formed into dies. Both products are straight petroleum based lubes containing advanced additive packages that are free of sulfur, chlorine, and pigmented compounds. They have excellent forming characteristics and compare very favorably to chlorinated and sulfurized lubes when used on hydroforming operations involving severe metal deformation and elongation. Hamidraw® 9014-LV is a lighter viscosity version of the two products. Hamidraw® 9019 is heavier and possesses better film adherence properties. Hamidraw® 9100-B is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping. It contains a polymeric lubricant package which provides the extreme pressure lubricating properties of the chlorinated additives formerly used. Hamidraw® 9100-B is environmentally acceptable and has enhanced removability characteristics. Hamikleer® 1975 HD is a synthetic machining lubricant/coolant for ferrous and non-ferrous metals. It provides the needed lubrication for light or heavy machining operations including: boring, drilling, reaming, tapping, and threading. It is non-staining to non-ferrous metals, e.g., copper, brass, and aluminum and has a liquid residual film, which keeps machinery parts moving.
Hamikleer® 2095 is a synthetic grinding and machining coolant concentrate designed to be used on both ferrous metals, non-ferrous metals, and also on milling of scale from copper or brass strip. Solutions provide excellent rust protection for cast iron and ferrous alloys with no staining on zinc, copper, brass, and bronze. The solution keeps wheels clean and suspends metallic fines and swarf, preventing their precipitation on ways, tables, and other work surfaces. It will not turn rancid and does not cause dermatitis. Hamikut®1860-LC is a heavy duty soluble oil cutting and machining fluid. It contains extreme pressure lubricating additives which are low in color and odor, yet provide the greatest degree of lubrication for extreme surface and internal grinding operations where problems, such as burning, often develop. It can be used on carbon steel, stainless, and non-ferrous metals including aluminum, copper, and brass. Hamikut® 1937-A is a medium-duty, soluble oil containing extreme pressure additives used for machining and grinding ferrous and non-ferrous metals, including zinc. It provides extremely good emulsion stability and is highly tolerant to other contaminants typically carried into emulsions from prior operations. Hamikut® 9036-B is an enhanced heavy duty soluble oil lubricant for heavy duty machining of ferrous and non-ferrous metals, including zinc. Provides corrosion protection, is low foaming, possesses excellent emulsion stability and produces good micro-finishes. It provides improved biological control capability for longer sump life in re-circulating systems. Hamikut® 9120-NC is an extremely effective chlorine free soluble oil for light and medium duty machining and grinding of steel, alloys, aluminum, and yellow non ferrous metals, like copper, brass or bronze. It produces superior micro-finishes, while maintaining stability in hard water. It has improved bio-resistance properties. It is designed for recycling and centrifuging, and is very low foaming. It produces an ultra-stable blue emulsion. Hamilube® 1744 is a straight oil containing extreme pressure additives for general machining of all metals, including Magnesium. Hamilube® 1955-A is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorus. It is transparent to allow viewing of the work piece during machining. It is not suitable for use with non-ferrous metals. It contains active sulfur and is non-staining on steel. |
