Activol® 1793-B is a sulfuric acid inhibitor for batch pickling. It is one of our strongest inhibitors, is a good “wetter” and provides a more uniform pickle and a better rinse. Additionally, it eliminates acid fumes and reduces hydrogen embrittlement. Pickle Life 1673-D (acid extender) and Activol® 1793-B can be used in combination to extend the life of the acid bath to iron levels of 7-12%. Activol® 1793-NF is a non-foaming version which can be used in operations utilizing combustion heating. Atmoscleer® 1785 is a foam blanket and fume suppressant for sulphuric acid pickle baths. Small amounts produce a heavy foam which cuts fumes and saves energy. This product may also be used for phosphoric acid baths. Atmoscleer® 8001 is a foam blanket additive for hydrochloric acid batch pickling baths. It imparts a densely packed, uniform layer of foam on the surface of a steel pickling bath. Some agitation may be required to generate the foam layer when there is not enough pickling action occurring, such as when the bath temperature is very low (below 1000F). It is extremely stable in hydrochloric acid baths containing high amounts of dissolved iron and under high temperature conditions. It cuts down on heat loss and holds corrosive hydrochloric fumes in the bath. It should be used in conjunction with Activol® acid inhibitors for hydrochloric acids, such as Activol® 1803, Activol® 1590-C, Activol® 1590–CP or Activol® 1903 for best results in batch pickling operations. Activol® 1874 is a pickling inhibitor for all sulfuric acid pickling operations. Activol® 1874 contains all the desired properties of a strong acid pickling additive including: high efficiency on carbon steels, good protection to alloys and silicon steels, a foam cover, wetting agents, excellent acid and temperature stability and fume control. Instantly soluble in sulfuric acid baths, it reduces acid drag-out and provides more uniform removal of scale from rod, wire and sheet steel. This product is also available in non-foaming version (Activol® 1874 –NF) for compatibility with sulfuric acid reclamation processes. Hamico® Neutralizer 809-L is a combination of liquid alkalis and surface-active (wetting) agents designed specifically for neutralizing acidic residues from ferrous metals after pickling operations. Hamikleen® 9002 is a free-flowing granular additive for use in sulfuric acid pickling. This product produces a brighter, more uniformly pickled steel surface and provides excellent wetting properties to the bath. Pickle Life® 1673-D is an additive for extending the useful life of sulfuric acid pickling baths up to 12% iron. Sunspeed® PA-7 is an acid pickling accelerator containing organic compounds designed to accelerate scale removal from hot rolled steels. It was specifically developed for use in hydrochloric acid pickling systems. It accelerates the reaction between the hydrochloric acid and scale components; FeO, Fe2O3 and Fe3O4 to increasing the rate of scale removal. | 
