Hamico® 138-L is designed for use as a vanishing oil. It contains lubricity additives which make it ideal for stamping, blanking or drawing of light to medium gauge steel and aluminum. Hamico® 138-L has extremely low odor, is non-emulsifying, has a rapid evaporation rate, and leaves minimal residue. Application of the lubricant can be via spraying, flooding or swabbing. Hamidraw® 1846-NC is a heavy duty non-chlorinated pigmented drawing lubricant for ferrous or stainless steels. It can be used for severe draws such as tube reducing, bar drawing, wire drawing, etc. The lubricant cleans quickly with hot alkaline or hot detergent cleaning. Hamidraw® 9000-F is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping of steel and non-ferrous metals such as copper, brass or bronze. It is a soluble oil containing a polymeric lubricant package which provides the extreme pressure lubricating properties without the negative impact environmental issues associated with chlorinated additives. This formulation offers good corrosion prevention on steel and the non-ferrous metals; particularly copper and brass. It is formulated to provide enhanced anti-wear properties and mild boundary lubrication. Hamidraw® 9100-B is an entirely non-chlorinated extreme pressure lubricant for heavy duty drawing and stamping. It contains a polymeric lubricant package which provides the extreme pressure lubricating properties of the chlorinated additives formerly used. Hamidraw® 9100-B is environmentally acceptable and has enhanced removability characteristics. Hamikleer® High Viscosity U.T. Couplants is a series of high viscosity versions of Hamikleer® 712-2 for ultrasonic testing of metals:
Hamikleer® 712-HV-1 Viscosity - 38,000 - 45,000 cps @ 720F
Hamikleer® 712-HV-2 Viscosity - 27,000 - 33,000 cps@ 720F
Hamikleer® 712-HV-3 Viscosity - 5,000 - 8,000 cps @ 720F
Hamikleer® 1975 HD is a synthetic machining lubricant/coolant for ferrous and non-ferrous metals. It provides the needed lubrication for light or heavy machining operations including: boring, drilling, reaming, tapping, and threading. It is non-staining to non-ferrous metals, e.g., copper, brass, and aluminum and has a liquid residual film, which keeps machinery parts moving.
Hamikut® 9120-NC is an extremely effective chlorine free soluble oil for light and medium duty machining and grinding of steel, alloys, aluminum, and yellow non ferrous metals, like copper, brass or bronze. It produces superior micro-finishes, while maintaining stability in hard water. It has improved bio-resistance properties. It is designed for recycling and centrifuging, and is very low foaming. It produces an ultra-stable blue emulsion. Hamilube® 1328-N contains no chlorinated compounds and only minimal amounts of sulfur and phosphorus. It has a light viscosity to flush away metal chips and provide efficient heat removal from the work and tooling. It is suitable for machining operations such as trepanning, threading, tapping, turning, milling and drilling of steel. Hamilube® 1955-A is a straight oil non-chlorinated lubricant that contains extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds or phosphorus. It is transparent to allow viewing of the work piece during machining. It is not suitable for use with non-ferrous metals. It contains active sulfur and is non-staining on steel. Hamilube® 1989 is a specially formulated synthetic lubricant for use in metal forming operations on aluminum and other non-ferrous metals, such as cooper or brass. It is recommended for drawing, stamping, blanking and cutting as a replacement for petroleum based straight oils. It contains no oil, sulfur, or chlorine. It provides excellent high film strength boundary lubrication, leaves no residue upon burnoff in an anneal, and is easily removed. Hamilube®1989-B is a lower viscosity version of Hamilube® 1989. Hamilube® 5705 is a straight oil containing extreme pressure additives for the general machining of tool steel and stainless steel. It contains no chlorinated compounds, phosphorus or animal fats. Not suitable for use with non-ferrous metals. Hamilube® 7709 is a non-chlorinated straight oil containing friction-reducing extreme pressure additives, which makes it suitable for drilling operations. It is also applicable for threading, tapping, turning, milling, trepanning and other machining operations on steel. Used on Stainless and Alloyed steels. It contains sulfurized additives and has a light viscosity, which makes it suitable for gun drilling. It will provide an adequate fluid film between the wear pads and the work material, will prevent welding of chips to the cutting edge of the drill, will cool the drill and the work, and dispose of the chips easily by flushing. Hamilube® 9200-VP is a chlorine free lubricant for the grinding and light machining of steel, copper, bronze or brass. It is a straight petroleum based lube containing an advanced additive package that is free of sulfur, chlorine, and pigmented compounds. It has excellent lubrication characteristics that compares very favorably to chlorinated and sulfurized lubes. While it is designed for use neat, as received, it can be cut back with mineral oil or solvents for lighter work. Removal of the residue from the metal can be performed with solvent degreasing, detergent, or alkaline cleaning. Hamisolve® 622 is a light colored, transparent degreasing solvent used in many applications for removal of oils, greases, mill soils, etc. Can be used on all metals, as received, by dip, spray or wipe. It will evaporate completely leaving surfaces clean and dry. Aqualube® 2029 is a water miscible, heavy duty non-chlorinated, non-sulfurized synthetic compound for medium to heavy drawing, stamping and blanking operations for steel and galvanized. It provides excellent lubricity and leaves a light, protective film to provide post process corrosion protection on steel. Kleerkut® 1900-FR is a light duty synthetic for machining & grinding operations on steel, cast iron, and aluminum. Kleerkut® 4900 Performs a wide variety of machining and grinding operations on both ferrous and non-ferrous metals. Kleerkut® 4900 is a bio-resistant semi-synthetic coolant, free of substances subject to the reporting requirements of SARA Title III. It provides superior rust protection when used in sumps which typically encounter large amounts of contaminants, and is ideal for use in central systems. It is low foaming , easy to clean using filtration or centrifuge, and long lasting.
Kleerkut® 4900 has two "sister" products: Kleerkut® 4900-LT and Kleerkut® 4900 HD. For more information on these products, please inquire at: info@HarryMillerCorp.com. |
